生物表面活性剂产生菌处理水体石油污染物的研究

为研究水体石油污染物的生物处理方法,通过富集培养、蓝色凝胶平板分离初筛、摇瓶复筛等方法从长期被石油污染的油泥中筛选生物表面活性剂产生菌.采用薄层层析显色法和红外光谱法鉴定该菌所产表面活性剂种类,测定表面活性剂的乳化性能、表面张力和临界胶束浓度等性能,并对菌株降解水体石油污染物的影响因素及效果进行了研究.结果表明,筛选出的生物表面活性剂高产菌株LJ2所产表面活性剂为糖脂,其乳化指数为33％,25℃下可将水的表面张力从71.14 mN/m降至27.22 mN/m,临界胶束质量浓度为5 mg/L;当表面活性剂水溶液质量浓度为100 mg/L时,其乳化指数可达50％.温度、降解时间以及NaCl质量分数对菌株LJ2处理水体石油污染效果影响很大.在34℃条件下处理5d,菌株LJ2对质量浓度为2 g/L的水体石油污染物的降解率高达99.5％.研究表明,生物表面活性剂产生菌L J2对水体石油污染物有良好的降解效果,而且该菌还对水体中较高浓度的NaCl有一定的耐受性.     

Comparing Green and Grey Infrastructure Using Life Cycle Cost and Environmental Impact: A Rain Garden Case Study in Cincinnati,OH

Green infrastructure (GI) is quickly gaining ground as a less costly, greener alternative to traditional methods of stormwater management. One popular form of GI is the use of rain gardens to capture and treat stormwater. We used life cycle assessment (LCA) to compare environmental impacts of residential rain gardens constructed in the Shepherd's Creek watershed of Cincinnati, Ohio to those from a typical detain and treat system. LCA is an internationally standardized framework for analyzing the potential environmental performance of a product or service by including all stages in its life cycle, including material extraction, manufacturing, use, and disposal. Complementary to the life cycle environmental impact assessment, the life cycle costing approach was adopted to compare the equivalent annual costs of each of these systems. These analyses were supplemented by modeling alternative scenarios to capture the variability in implementing a GI strategy. Our LCA models suggest rain garden costs and impacts are determined by labor requirement; the traditional alternative's impacts are determined largely by the efficiency of wastewater treatment, while costs are determined by the expense of tunnel construction. Gardens were found to be the favorable option, both financially (~42% cost reduction) and environmentally (62‐98% impact reduction). Wastewater utilities may find significant life cycle cost and environmental impact reductions in implementing a rain garden plan.     

Motorcycle crashes potentially preventable by three crash avoidance technologies on passenger vehicles

Objective: The objective of this study was to identify and quantify the motorcycle crash population that would be potential beneficiaries of 3 crash avoidance technologies recently available on passenger vehicles.

Methods: Two-vehicle crashes between a motorcycle and a passenger vehicle that occurred in the United States during 2011–2015 were classified by type, with consideration of the functionality of 3 classes of passenger vehicle crash avoidance technologies: frontal crash prevention, lane maintenance, and blind spot detection. Results were expressed as the percentage of crashes potentially preventable by each type of technology, based on all known types of 2-vehicle crashes and based on all crashes involving motorcycles.

Results: Frontal crash prevention had the largest potential to prevent 2-vehicle motorcycle crashes with passenger vehicles. The 3 technologies in sum had the potential to prevent 10% of fatal 2-vehicle crashes and 23% of police-reported crashes. However, because 2-vehicle crashes with a passenger vehicle represent fewer than half of all motorcycle crashes, these technologies represent a potential to avoid 4% of all fatal motorcycle crashes and 10% of all police-reported motorcycle crashes.

Discussion: Refining the ability of passenger vehicle crash avoidance systems to detect motorcycles represents an opportunity to improve motorcycle safety. Expanding the capabilities of these technologies represents an even greater opportunity. However, even fully realizing these opportunities can affect only a minority of motorcycle crashes and does not change the need for other motorcycle safety countermeasures such as helmets, universal helmet laws, and antilock braking systems.     

基于数字信息化的消防呼吸气瓶检验管理系统研究与开发

为解决碳纤维缠绕式消防呼吸气瓶检验中因单机作业而存在的检验效率低、检验质量差、受人为因素影响的问题，研究开发基于数字信息化的碳纤维缠绕式消防呼吸气瓶检验管理系统，该检验系统包括消防呼吸气瓶数据库、OA系统、呼吸气瓶检验软件和手机APP。利用二维码技术和计算机网络，实现呼吸气瓶数据库、检验软件、OA约检和报告审核审批系统、手机APP的数据传输。结果表明:该检验管理系统实现了呼吸气瓶检验的无纸化、过程的可追溯性、检验结果的防伪性等功能，其对于碳纤维缠绕式消防呼吸气瓶检验具有较强的适用性和可行性。     

绿色化工环保技术与环境治理的关系

我国化工产业的不断发展,带动了我国经济的飞速发展,给人们的生活带来了许多便利条件,但是与此同时也对我国的环境造成了严重的破坏,化工生产用到许多化学材料,在生产过程中会产生大量的化学废弃物,对环境的污染造成很严重的影响。我国对化工生产给环境保护造成的影响高度重视,随着绿色化工环保技术的出现,有效解决了化工产业造成的环境污染问题,对我国的环境问题进行了有效的改善,对我国工业的发展具有重要意义。本文针对绿色化工环保技术进行分析,探讨绿色化工环保技术在环境治理中的有效应用。     

地表水环境遥感监测关键技术与系统

本文主要是围绕地表水环境遥感检测展开讨论,全面介绍了水环境检测的关键技术和系统,建立改进双峰法的水体分布遥感提取方法,并以具体地区为例进行分析,采用不同方法建立解析方法,从根本上提升反演方法的区域和积极适用性,希望能够对相关人员起到参考性价值。     

生态环境检测及环保技术的应用研究

本文以生态环境检测及环保技术的应用为研究对象,主要介绍了生态环境检测以及环保技术应用面临的主要问题,而且提出了生态环境检测及环保技术应用的有效措施,希望可以为相关工作人员提供参考意见。     

关于城市河流水污染防治技术应用和研究

随着我国经济的不断发展,各种工厂也大量的成立,而这也使得很多废弃物及废水被过度排放到湖泊与河流之中,进而导致其出现了严重的污染问题。污染不仅对人们的生活质量产生了影响,同时也对生态的平衡发展产生了很大的阻碍,业已经成为社会各界高度关注和重视的问题。基于此,本文围绕城市河流水污染的现状进行了分析,对于污染产生的原因也进行了阐述,针对城市河流水污染防治技术的应用也进行了探讨和研究,以期可以有效解决我国出现的河流水污染问题,进而为人们及社会营造一个全新、绿色的河流环境。     

水环境监测信息化新技术的应用分析

随着国民经济的快速发展,我国人民的生活水平和质量也随之而提高,对于生态环境以及居住环境的要求也相应提升。水是万物之源,是保障人们生产生活的基本要素之一,为了有效提升水环境质量,先进的水环境监测技术必不可少。随着科学技术的飞速发展,水环境监测技术也在不断调整和优化,逐渐向信息化方向发展,在生态环境保护工作中发挥着不可替代的作用。本文将详细阐述现阶段我国在水环境监测工作中实施的信息化新技术,希望能为相关研究人员提供参考和借鉴。     

基于大数据技术构建生态环境信息化体系及其重点应用研究

本文首先分析了生态环境信息化体系的主要构成要素,其后基于大数据技术的生态环境信息化体系重点领域应用进行了深入研究。